Coulter Harrow 48 - Hitch SideSnap Content

Built to Perform, Built to Last

Great in the Field. The primary uses of the Gates Magnum Heavy Harrow are for heavy residue management, fertilizer and chemical incorporation, and spring seedbed preparation. Saves Time and Fuel. With the Gates Magnum Heavy Harrow, you can run at high speed (8-12 mph) covering large areas in less time. With today’s high fuel prices, it can give you fuel savings of 50 to 75 percent over conventional implements. A Winning Combination! The combination of 5/8″ x 30″ or 9/16” x 26” tines, unsurpassed section down-pressure, a heavy tubing frame and precise, hydraulic controlled tine angle adjustments make the Gates Magnum an ideal machine for all types of farming practices. If you want productivity up to 100 acres an hour, this is the tool for you!

Applications

  • Straw management after harvest
  • Seed bed preparation
  • Fertilizer and chemical application and incorporation

Features

  • Widths available: 32′ to 84′, special orders up to 112’
  • Standard Auto Fold
  • 2″ Knuckle pin (Heaviest in Industry)
  • 14L x 16.1 8-ply tires
  • 10″ x 10″ x 1/4″ wall tubing toolbar
  • Drawbar can be raised or lowered in 2″ increments to compensate for tooth wear
  • Transport width 11′
  • 5/8″ x 30″, 9/16” x 26” or 1/2″ x 24″ tines (height measured from center of coil) with optional Gates Patented Chrome Carbide Tips
  • 4 down pressure springs per section eliminate bounce and ensure maximum down pressure
  • Hydraulic or manual tine angle adjustment

Options

  • On-the-go hydraulic tine adjustment
  • Harrow Tine Chrome Carbide Tips improve life 5 to 10 times (US Patent # 6.425.446)
  • Granular applicator with 2000# Hydraulic Bag Lifter
    Back-up bar
  • Air kits for broadcasting fertilizer, chemical, or seed
  • Drop Tube attachments that can apply dry or liquid fertilizer and seed directly behind the harrow tine for row placement

Specifications

Standard Features Specifications
Available Widths 32′, 36′, 40′, 44′, 48′, 56′, 60′, 64′, 68′, 72′, 80′, 84′, 100′
Frame 10″ x 10″ x 1/4″ wall tubing
Harrow Tine Spacing 12″ achieves 3″ pattern at the rear using 4 bars
Harrow Tines Standard 5\8″ diameter x 30″ length
Tine Angle Adjust Manual Adjust
Wheel Hubs 8000lb wing hubs and 12000lb transport hubs
Tires Tire 385/65 R225
Power Requirements Approximate engine HP requirement 3 to 5 HP per foot

Optional Equipment

  • Chrome carbide wear tips on harrow tines
  • Hydraulic tine angle adjust
  • 1/2″ or 9/16″ diameter tines
  • 5 bar harrow option (2-1/2″ spacing pattern)

Dimensions

Type Transport Height Transport Width
Without Baskets 9 11
With Baskets 10’4″ 11

Weights

Size 4 Bar 5 Bar
32 7520 8160
36 8160 8880
40 8800 9600
44 9440 10320
48 10080 11040
56 11360 12480
60 12000 13200
64 12640 13920
68 13280 14640
72 13920 15360
80 15200 16800
84 15840 17520
100 18400 20400